Verint Nextiva S1700e Series Betriebsanweisung PDF herunterladen (Seite 40)

3: Configuring and Installing the Device

24 Verint Video Solutions

For example, here is an S1100w transmitter connected to a PTZ camera in an RS-422

2-wire context:

For a two-wire, half-duplex RS-485 connection:

1. Use the following wiring scheme:

2. Set the line driver to the 485h-f value (see page 33).

RS-232

For an RS-232 connection, use the following wiring scheme to plug the device to the

peripheral, using the DB-9 connector on the CAB9P cable:

Cable Peripheral

Signal name Wire pair Wire color Signal name

Data+ green/black green Data+

Data- black Data-

Signal ground brown/black brown Signal ground

Signal ground black Signal ground

DB-9 pin number Cable signal name

2RxD

3TxD

5 Signal ground

7RTS

8CTS

Status

Signal ground

(brown and black)

Coax cable

BNC barrel

connector

Target device (PTZ)

Power (red and black)

Tx+ / Tx-

(yellow and black)

Rx+ / Rx-

(green and black)

Rx+ / Rx-

Signal ground

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 110 111

Keine Kommentare

Verint Nextiva S1700e Series Betriebsanweisung Seite 40